| Online Catalog | Fast Entry | Order History | Get Quote | View Cart | Logout |
|
Vacuum Hardware Introduction |
|
| Each
Electrical Feedthrough offered in this catalog is supplied with a
standard mount to install the feedthrough onto the vacuum chamber. This section details a full range of accessories for use with the five standard vacuum mounts:Weldable, Conflat® compatable Del-Seal™ CF Flanges, ISO NW compatible Kwik-Flange™ , one-inch bolt Del-Base™ Baseplate Mounts, and National Pipe Tread (NPT) Mounts. |
|
|
|
|
|
Del-SealTM CF Flanges Del-SealTM (Conflat® compatible) metal seal flanges have become America’s industry standard and the world’s leading choice for ultra high vacuum flanges. They are listed with both the American standard size designations as well as the European DN CF standard. They are offered in 13 sizes from 1.33'' (DN16 CF) to 16.5'' (non-DN standard) diameters. Copper gaskets, Viton® elastomer gaskets and bolt kits are also detailed. |
For complete list of parts, general specifications & product
features click on links below Del-SealTM CF blank flanges OFE Copper Gaskets Viton® Flat Gaskets 6-Point Bolt Sets 12-Point Head Bolt Sets |
|
|
|
|
ConTorrTM OFE-Copper Gaskets ConTorrTM Gaskets are an ISI patented design offered in plain or gold-plated OFE-copper. What makes these gaskets unique from conventional copper gaskets is the revolutionary method by which they are installed, held in place and removed from metal seal flanges. |
For complete list of parts, general specifications & product
features click on links below ConTorrTM OFE Copper Gaskets ConTorrTM Gold Plated OFE Copper Gaskets |
|
|
|
|
ISO NW Kwik-Flange Kwik-FlangeTM (ISO NW compatible) elastomer seal flanges were specifically designed for high vacuum system connections requiring quick and frequent assembly and disassembly. They have been modeled after the globally established ISO NW flange format. ISI offers the Kwik-FlangeTM system, including mounting accessories, in tube sizes from .750'' (DN16 KF) to 2.00'' (DN50 KF). |
For complete list of parts, general specifications & product
features click links below Kwik-Flange Blank Flanges Clamps Centering Ring Assemblies Viton® Gaskets |
|
|
|
|
Baseplates Baseplate elastomer seal mounts are self-contained mounts, originally developed for the vacuum coating industry and designed for use with bell-jar systems or flat Baseplate vacuum chambers. These blank mounts fit through 1.00'' holes. As an added convenience, ISI blank Baseplate mounts are fitted with a female 3/8-16 thread to support custom vacuum structures. |
For complete list of parts, general specifications & product
features click links below Blank Baseplate Fittings |
|
|
|
|
Blank NPT Fittings National Pipe Thread (NPT) mounts are also offered as a line of standard blank mounts. These are made of 316 stainless steel material and used to blank-off unused NPT vacuum ports. These mounts are typically sealed using conventional plumber’s Teflon® tape and are suitable for rough vacuum applications.
|
For complete list of parts, general specifications & product
features click links below Blank NPT fittings |
|
|
| INTENDED OPERATING CONDITIONS Electrical ratings are determined by various factors, including dielectric strength, geometry and system operating pressure. Please note that all ISI catalog products are electrically rated for operation with one side in dry atmospheric conditions and the other side in a vacuum environment with a maximum system pressure of 1 x 10-4 Torr. We advise that users make allowances for deviations from stated operating parameters and take adequate safety precautions when feedthroughs are operated at high voltages or high currents. |